27
1. Note: The fan can also be opera-
ted without the Powerbank inser-
ted!
2. Your new fan offers the possibi-
lity of operation without a power
source, if the included Power-
bank has been appropriately char-
ged beforehand. If you
leave the Powerbank in
the appliance and con-
nect the appliance via the
power grid, the recharge-
able battery of the Power-
bank will be recharged.
3. Alternatively, char-
ging is possible via a USD
connection.
4. The Powerbank can
be removed, if you open
the appropriate compart-
ment on the rear of the
appliance (see illustra-
tion).
5. To check the
actual charge
status, briefly
press the ope-
rating button on
the Powerbank
(see illustra-
tion).
6. The LEDs show the actual charge
status, four LEDs indicate that the
Powerbank is completely charged
(respectively the LEDs stand for
25, 50, 75, and 100%).
7. Connect the Powerbank to the
USD charging port with the pro-
vided USB cable. In this regard,
always comply with the following
instruction. If you charge the
rechargeable battery via a USB
power source, you must first
ensure that the power source pro-
vides sufficient charging current.
If not, the appliance and the USB
power source can be damaged.
Consequently, for example, never
use the USB port of a computer or
USB hub unless these are special
charging ports with an output cur-
rent of at least 2 A.
8. The LEDs are flashing while the
rechargeable battery is being
charged. The charging time
depends on the particular charge
status, and can be several hours.
9. Never use the charge output and
the charge input at the same time.
You can also use the Powerbank
to charge mobile devices (such as
smart phones). First check whe-
ther the Powerbank is completely
charged. Connect the plug of the
provided cable to the USB char-
ging output, and then connect
the micro USB plug to the micro
USB socket of the mobile device.
The charging process begins. The
Powerbank can supply a total
of 2.1 A output current. Via the
flashing LEDs you can check the
charge status of the Powerbank
during the charging process.
Monitor the charging process. If
the charging process should be
interrupted or ended, disconnect
the cable from the mobile device.
10. As soon as the rechargeable bat-
tery is fully charged, disconnect
the Powerbank from the USB
power source.
11. Then insert the Powerbank into
the appliance (the connections
must point downward; the LEDs
are in front). As soon as the Pow-
Copyright UNOLD AG | www.unold.de
Содержание 86870
Страница 105: ...105 Copyright UNOLD AG www unold de ...
Страница 106: ...106 Copyright UNOLD AG www unold de ...
Страница 107: ...107 Copyright UNOLD AG www unold de ...
Страница 108: ...Aus dem Hause Aus dem Hause Copyright UNOLD AG www unold de ...