26
OPERATION
1. Comply with all safety instructions and safety regulations.
2. Ensure that you have selected a safe location.
3. Plug the mains plug of the appliance into an electrical outlet (220–240 V ~
50 Hz).
4. Place the main switch on the rear of the appliance on “I”
5. The appliance is now in standby mode, only the ON/OFF button
is
active.
6. Press the ON/OFF button. A short signal tone will sound.
7. Caution: The following explanations apply for adjustment on the control
panel itself, and via the remote control unit. The button designation is iden-
tical in each case.
Heating capacity
8. You can select from two heating capacities:
“Low” level for low capacity
(approx. 1,000 watt)
“High” level for high capacity
(approx. 2,000 watt)
9. Note: It takes a few moments until the higher capacity is completely active.
10. Use the button to select the desired capacity. The respective indicator
lamp shows the level at which the appliance is operating.
11. The appliance heats until the desired temperature is reached, then the
appliance switches off. The appliance will switch on again as soon as the
room temperature drops below the set temperature.
Fan operation
Level “ “ for the fan function (cool air)
j
m
h
i
g
k
l
Display
:
g
Indicator lamp Oscillation
h/m Temperature / Hour display
°C / h
i
Indicator lamp Fan operation
j
Indicator lamp - low heating capacity
k
Indicator lamp - high heating capacity
l
Indicator lamp Timer
Copyright UNOLD AG | www.unold.de