Unold 48945, Инструкция по эксплуатации

Страница: 25 / 84

25
1. Prepare the appliance as described in the section „Before using the
appliance the first time“.
2. Remove the ice container (4) from the appliance by pulling it upward and
out of the appliance.
3. Fill the water tank with fresh, clear, cold water
to the „Max“ marking. The mark is in the middle
on the rear in the water tank. Do not fill with water
above the Max marking to prevent the water from
running out.
4. Ice cubes cannot be made from fruit juice.
The acid container in the fruits can damage the
appliance.
5. Slide the ice container back into the appliance.
6. Press the ON/OFF button.
7. Select the desired ice cube size. Choose from the following sizes:
ƒ
Small
ƒ
Large
8. To select the size, press the „Select“ button until the indicator light is
illuminated green for the desired ice cube size.
9. The appliance starts to make ice cubes. The first ice cubes that are made
do not have the selected size, since it takes several minutes before the
INSTRUCTIONS CONCERNING THE WATER
1. Please only use drinking water to produce ice cubes. Do not use any addi-
tives, flavourings or similar items, such items can contaminate the appli-
ance. The water used should not be cooler than 7°C and it should not be
warmer than 35°C. In addition, you obtain the best results when the appli-
ance is working in an ambient temperature of 15°C to maximum 38°C.
2. Tip: As a rule the appliance produces slightly opaque ice cubes, which
however does not impair the quality of the ice cubes. This is due to the
especially fast freezing process. To get crystal clear ice cubes, use drinking
water, which has been boiled and cooled beforehand.
MAKING ICE CUBES
Copyright UNOLD AG | www.unold.de