uno.
Uno International Ltd.
Stepper Control Board Manual
9/21
3. Specify the type of motor whether Pump, Linear Drive or Rotary Drive. The parameters associated with
your chosen motor type will be updated automatically such as µl/revolution if you chose Pump.
4. Enter the value you established during the calibration process whether µl/revolution, mm/step or
steps/revolution and press OK.
5. From now on, whenever you wish to run the pump, you can enter the volume you would like to
dispense, the speed of dispense and the direction - whether forward or backward (dispense or
aspirate).
6. Save your settings.
