7
1
Current transmission channel
2
Temperature display
3
Humidity display
4
Red pilot light
5
Symbol for radio frequency connection between base unit and wireless
sensor (display only appears when the transmission is occurring)
6
Loop for hanging
7
Sliding switch 1 2 3: Set sensor number (transmission channel)
8
Battery compartment
Note:
If you are going to use the wireless sensor included in the package, there is no need to
change the transmission channel inside the outdoor sensor.
Changing the transmission channel is only necessary when you are going to add additional
wireless outdoor sensor. See “ How to add extra sensors “ on Page13.
How to set up
Insert batteries
1. Insert 2x AA batteries into your T056I wireless sensor. Pay attention to the correct
polarity. While the sensor is transmitting, the red LED indicator will flash.
2. Use a 5V power cord to plug the weather station into a wall outlet.
(Note: When the weather station only uses batteries, the screen will turn off after 10s and
you will need to touch the
button to activate it.)
