10
“kaka”
Charging
Charging
Charging
Charging the
the
the
the Battery
Battery
Battery
Battery
�
Connect the charger to power supply
�
Plug the charger connector into the charge port at the top side of the phone.
(Note: Put upward the side with arrow.)
�
Now, a charge indicator display s on the upper right corner of the screen
and flickers during the charging process. If the battery is charged in
power-off condition, the screen will display charging indicator to tell the
phone is charging. If the phone is over-used in shortage of battery, the
screen m ay not display the charge indicator im mediately but after a while.
�
When the battery level indictor changes from charging sym bol to full level
indicator and stops flickering, it means charge has been finished. If the
battery is charged in power off condition, a charging-stop animation
indicates the charge has been finished. Generally the whole charge process
needs 3~4 hours. During the charge process, your phone and charger m ay
becom e hot, and this is a normal phenomenon.
�
Please disconnect the charger with the phone and the outlet when finish
charging
Note
Note
Note
Note
：
�
Please put the phone at the ventilated place with temperature between
＋
5
℃
~
＋
40
℃
. Please use the charger provided by the provider. Using
unauthorized charger m ay cause danger and violate the authorization and
warranty rules of the phone.
�
Please charge the battery in tim e when your phone auto-powers off or
displays a warning “battery is low”. If the battery is not fully discharged,
the phone will reduce charging tim e automatically.
�
The phone’s talk tim e and standby tim e are based on ideal working
environments. In practice, the battery work tim e varies with different
network conditions, work environments and m odes.
g
Make sure the battery is properly installed while charging; do not remove
the battery during charging.
g
If the charger is not disconnected with the phone and the outlet, the
phone will be charged again after a certain tim e (about 5~8 hours) when
the battery is consumed to a certain degree. We do not suggest you would
practice in this way for it will cause negative effect on the performance
and lifetim e of the battery.
2.3
2.3
2.3
2.3 Usage
Usage
Usage
Usage of
of
of
of USB
USB
USB
USB
-
Insert the USB cable in power on status:
Plug in USB cable in power on status and the m enu will be popped out:
1) Mass Storage: it can still be in power on status and be used as a U-disk,
while it has the function of USB charging.
2) COM Port: it can be used as a modem or USB charging function.
All manuals and user guides at all-guides.com
