manualshive.com logo in svg

Uniwell SX-330, Руководство по эксплуатации, Страница: 10 / 130

Поделиться
Скачать
Uniwell SX-330 Скачать руководство пользователя страница 10

6

right 

       wrong

REPLACING PAPER ROLLS

SX-330/330F

Terminal Printer TP-420/422/522

high grade paper roll

44.5 ± 0.5 mm x ø83 mm

paper thickness

0.06 to 0.09 mm

fine quality paper roll

76 ± 0.5 mm x ø80 mm

diameter of paper roll core

outer:  76 ± 0.5 mm x ø18

            inner:  76 ± 0.5 mm x ø12

1.  Receipt & Journal Printer for SX-330/330F

a)

 

Removing the printer cover:

  Turn the printer cover lock key counter-clockwise and gently lift the cover.

b)

 

Removing the old paper:

  Press the receipt or journal paper feed key to feed the remaining paper through

the printer or push the green paper release lever towards the paper roll bed in direction  

A 

 and pull the paper

through the printer.  

DO NOT

 force paper through the printer as this may result in damage to the printer

mechanism or cause a paper jam.

c)

 

Inserting new paper: 

 Place the new paper in the correct

position on the printer's paper roll bed.

d)

 

Make sure that the leading edge of the new paper roll is cut

straight

 across.

e)

 

Set the paper release lever and insert the leading edge into the

printer slot.

f)

 

In order to feed the paper, press the paper feed key to the roll you are replacing.

g)

 

In the case of the journal paper, insert the loose end of the paper tightly to the slot of journal 'take-up' spool.

< When paper jammed inside the paper guide >

a)

 

Raise the paper guide by lifting both paper release

levers in direction  

B  

.

b)

 

Remove the jammed paper by hand.

c)

 

Close the paper guide.

d)

 

Then, with both hands, gently press down both sides of

the paper guide.

A

B

Содержание SX-330



































































































































Отзывы:

Нет отзывов