84
IX. WARNING MESSAGES
The messages are displayed showing on abbreviation followed by a warning number.
xx
SYSTEM
E
RROR
xx
U
NALLOABLE OPERATION
xx
INPUT
D
ATA ERROR
xx
L
IMIT ERROR
xx
I
NPUT COMPULSORY
xx
C
OMMUICATION ERROR
xx
P
APER CONDITION
xx
CONFIRM
Q
UESTION
00
System error: Require a initial reset.
01
Printer error: Disconnect AC cord and then back on or check the printer.
02
Input figure over limitation: Press
CL
key.
(PLU HALO can be omitted temporarily by using
HALO RELEASE
key.)
03
Clerk is not signed on.
04
Item/Media (slip) validation is compulsory: Print item or media validation by
MISC. VALID
key.
(omitted temporarily by
OFF COMPULSORY
key)
05
Total (slip) validation is compulsory: Print total validation by
TTL. VALID
key.
(omitted temporarily by
OFF COMPULSORY
key)
06
Validation paper has not been inserted. (displayed by [SF-10.c=1])
07
Validation paper has not been removed. (displayed by [SF-10.c=1])
08
Message input is compulsory. (omitted temporarily by
OFF COMPULSORY
key)
09
Perform foreign currency subtotal display operation: Press
F.C. SBTL
key and
F.C. MEDIA
key.
10
Number of persons input is compulsory. (omitted temporarily by
OFF COMPULSORY
key)
11
SBTL
key depression is compulsory before tendered amount input.
(omitted temporarily by
OFF COMPULSORY
key)
12
Tax table is not preset: Enter a tax amount manually. Preset tax table.
13
Tendered amount input is compulsory. (omitted temporarily by
OFF COMPULSORY
key)
14
Drawer is open: This message is displayed only when the 'drawer open sensor' is being used.
15
Cash declaration is compulsory. (omitted temporarily by
OFF COMPULSORY
key)
16
Registration buffer is almost full: Prepare to close the transaction.
17
PLU stock is zero or negative (displayed by [SF-17.h=1]): Enter stock by programming.
(omitted temporarily by
HALO RELEASE
key)
18
Journal paper near end (displayed by [SF-2.e=1]): Replace with new paper roll.
(only at the beginning of transaction, it can be released temporarily by using
OFF COMPULSORY
key)
19
ECR to ECR RAM data transfer error: Check the cable connection between ECR & ECR. Refer to the
INTERFACES & PERIPHERALS MANUAL for details.
20
NOT USED
21
Slip printer is busy: Press
CL
key and wait for the printer to be available. Press 'PRINT' on the printer to
proceed with the slip.
22
Short tendering amount input of TTL 5 prohibited
23
Receipt paper end: While the paper is replaced, only
RPF
key can be pressed. Press
X2
key to start printing.
24~27
NOT USED
28
Simple condiment PLU entry prohibited: Main PLU not entered yet.
29
Simple condiment PLU input compulsory. (omitted temporarily by
OFF COMPULSORY
key)
30
PLU not found: Enter correct PLU code or program the PLU code.