TEC00-014
Pico2000 User Manual (Rev. 3.0)
Page 18 of 51
Scheduled recording
A programmable timer is implemented for scheduled recording.
PICO-2000 supports both weekday and weekend scheduled recording.
The timer will start and stop scheduled recording automatically according to
your input.
A green indicator indicates that the camera is recording under the timer control.
The default recording duration value is 0, which represents infinity or continue
recording.
During schedule recording, you can manually over ride to instant recording
mode by pressing down the camera button. The indicator will change to
yellow to indicate that the camera is under instant recording.
However, it will automatically resume scheduled recording once you click the
camera button again to turn off instant recording of that camera. The indicator
will then resume to green.
Please see the section of “Recording Setting” for the setup and implementation
example of the schedule recording.
Note:
Only the logon username of “SUPER” can access the utility for
configuring settings of scheduled recording parameters.
Tip:
The user can verify if scheduled recording is actually taking place
by trying to see if the green indicator light(s) in the RECORDER
panel is/are lit.
