UNIVIEW TIC600, Инструкция по установке, Страница: 6 / 19

● The face needs to be focused clearly, so that camera can detect the skin surface such as
forehead directly.
● The tested person should walk normally along the guide belt (no more than 2 steps per
second), and look up at the camera when passing the detection area;
2.3.2 Screening instructions
The core purpose of the temperature measurement and screening system is to screen the target of fever
personnel from the normal temperature population, and then check it again through the medical
temperature measurement instrument.
If you want to simulate the test of fever personnel, you can choose more than 2 normal temperature
personnel to test together, and one of them can hold a 38-40
℃
warm mineral water bottle and
put it on the forehead to test.
3 Debugging guidance
3.1 Computer host requirements
● system ： win7 or win10
● processor
：
i5 9600 and above
● hard disk ： 1T above
● Monitor
：
17 inches above
● Memory more than 8GB
● IE10/IE11
3.2 Computer network configuration
1. Turn off computer firewall
；
2. Uninstall computer antivirus software ；
3. Configure the IP address of the computer as 192.168.1.100 (it must be modified to this
IP address), subnet mask: 255.255.255.0