UNIVIEW TIC600, Инструкция по установке, Страница: 2 / 19

Statements
● The contents of this manual will be updated from time to time, and the updated contents will be
added to the new version of the manual without notice.
● The manual may contain technical inaccuracies or printing errors
Safety precautions
● When installing the equipment, please have qualified service personnel or system installation
personnel to operate
● Install the equipment in the environment with lightning protection
● Please do not touch the lens to prevent it from being damaged or dirty.
● Please pay attention to prevent the lens from being worn, scratched or even scratched.
● Because uncooled infrared thermal system uses a very sensitive thermal sensor, the lens shall not
be directly aimed at a strong radiation source (such as the sun, direct laser beam or reflection)
under any circumstances (whether the system is turned on or off), otherwise it will cause permanent
damage to uncooled infrared thermal system.
● This product is a precision electronic instrument, so please handle it carefully in the process of use,
storage and transportation to prevent the equipment from being collided by external force or falling
from high place and other dangerous actions.
● During transportation and storage, the ambient temperature shall not be lower than - 25
℃
; the
original packing box must be used during transportation
● Before turning on the device, make sure that the power supply is connected properly. If the power
supply is connected incorrectly, the device may be damaged
● Do not press any object on the power line, and do not place the equipment where the power line is
easily touched
● If the equipment runs abnormally, please contact the supplier and do not dismantle the equipment
by yourself.