uniview technologies CI111UNV33, Быстрое руководство

Страница: 7 / 32

gently. If the camera will not be used for an extended period
of time, put on the lens cap to protect the sensor from dirt.

Do not aim the camera lens at the strong light such as sun or
incandescent lamp. The strong light can cause fatal damage
to the camera.

The sensor may be burned out by a laser beam, so when any
laser equipment is being used, make sure that the surface of
the sensor not be exposed to the laser beam.

While shipping, the camera should be packed in its original
packing.

Use a power adapter or a PoE device that meets
requirements. Otherwise, the camera may be damaged.

Keep the length of the power cord between the power
adapter and the camera within 1.5 meters, otherwise, the
power voltage on the camera may be lowered and may
cause exception. If the power cord is not long enough,
extend the part between the power adapter and the power
supply.

Do not move the camera by lifting the tail cable.

Do not cut the tail cable. Exposed tail cable can cause short
circuit and damage the camera.

Use the waterproof tapes to protect the end of tail cable,
and keep the tail cable from water.