Univide UniWorkstation 5548, Руководство пользователя

Страница: 82 / 102

78
①
On the Adapter Properties screen, use the arrow keys to select RAID Properties on the screen and press Enter.
②
When you are prompted to select a volume type, select Create IS Volume. The Create New Array screen
shows a list of disks that can be added to a volume.
③
Move the cursor to the “RAID Disk” column. To add a disk to the volume, change the “No” to “Yes” by
pressing the + key, . key, or space bar. As disks are added, the Array Size field changes to reflect the size of
the new volume.
There are several limitations when creating an IS (RAID 0) volume:
z
All disks must be either SATA (with extended command set support) or SAS (with SMART support).
z
Disks must have 512-byte blocks and must not have removable media.
z
There must be at least 2 and no more than 8 drives in a valid IS volume. Hot spare drives are not
allowed.
⑥
When the volume has been fully configured, press C and then select Save changes then exit this menu to
commit the changes. The configuration utility will pause while the array is being created.
NOTICE
Integrated Striping does not provide any data protection in the event of disk failure. It is primarily used to
increase speed.
5.2.5.3 Creating a Second IS Volume
The LSI Logic SAS controllers allow you to configure two IS volumes, or an IS volume and an IM or IME volume.
If one volume is already configured, and if there are available disk drives, there are two ways to add a second
volume.