Univex UPASTA, Руководство по эксплуатации и техническому обслуживанию

Страница: 18 / 24

18
7.3.2 - Removing the bowl
To clean the machine thoroughly at the end of each processing cycle, you can also
remove the bowl.
Follow these operations to correctly remove the bowl:
REMOVING THE BLADE
- remove the liquid dosing tank REF. 1, lift the
lid up REF. 2, rotate the lever anticlockwise
REF. 3. By holding with one hand the blade
REF. 5, remove the bar REF. 4.
Then lift-up and remove the blade REF 5.
REMOVING THE SCREW
- unscrew the ring nut REF. 7 by rotating it
clockwise using the key REF. 6 and remove
the die REF. 8 and remove the screw REF. 9.
REMOVING THE COUPLING
To remove the coupling REF. 11, undo the 4 bolts
REF. 10 which fasten it to the bowl, and remove it.
REMOVING THE LID
To remove the lid REF. 2, hold it with one hand,
unscrew the knob REF. 12 and remove it.
REMOVING THE BOWL FRONT PANEL
To remove the front panel REF. 14, hold it still with
one hand and unscrew the 8 remaining knobs
REF. 13; the front panel is now loose and can be
removed.
REMOVING THE BOWL
After correctly completing all the above operations,
pull the bowl towards you with two hands REF. 15.
15
12
2
13
14
10
11
1
2
3
4
5
6
7
8
9
Fig. 7.3.4
Fig. 7.3.1
Fig. 7.3.3
Fig. 7.3.2