Univex SILVER 50, Руководство оператора

Страница: 9 / 16

TROUBLE-SHOOTING GUIDE
TROUBLE POSSIBLE CAUSE REMEDY
1. MIXER WILL NOT
OPERATE
1.1 ELECTRICAL SERVICE DOWN. 1.1 CHECK ELECTRICAL SERVICE. REPLACE
FUSEOR RESET CIRCUIT BREAKER AS
NECESSARY
1.2 BURNED SWITCH CONTACTS. 1.2 REPLACE OR CLEAN CONTACTS.*
1.3 TIMER NOT TURNED ON 1.3 TURN TIMER ON
1.4 BURNED OUT MOTOR 1.4 REMOVE, TEST, REPAIR OR REPLACE*
1.5 SAFETY GUARD NOT CLOSED 1.5 CLOSE SAFETY GUARD
1.6 EMERGENCY STOP BUTTON NOT
TURNED ON
1.6 TURN EMERGENCY BUTTON ON
2. MIXER RUNS BUT
SPIRAL WILL NOT
TURN.
2.1 BROKEN OR SLIPPING BELT 2.1 TIGHTEN OR REPLACE. *
2.2 BROKEN PULLEY 2.2 REPLACE. *
3. SPIRAL RUNS BUT
BOWL WILL NOT RUN
3.1 BROKEN OR SLIPPING BOWL CHAIN 3.1 TIGHTEN OR REPLACE. *
4. ALL THE LIGHTS ARE
ON BUT MIXER WILL
NOT OPERATE
4.1 THE THERMAL PROBE STOPPED THE
MOTORS BECAUSE THE DOUGH WAS TOO
STIFF, OR THE MIXING TIME TOO LONG
4.1 WAIT 20 MINUTES FOR THE MOTORS
TEMPERATURE TO GO DOWN AND PRESS
START BUTTON TO FINISH THE MIXING
CYCLE
5.0 EXCESSIVE NOISE.
5.1 BADLY WORN OR FRYED DRIVE BELTS 5.1 REPLACE BELT. *
5.2 OVERLOAD MIXING BOWL. 5.2 ADJUST CONTENTS OF BOWL PER
MIXING CAPACITIES TABLE
* REMEDIES DESIGNATED WITH AN * REQUIRE THE SERVICE OF AN AUTHORIZED SERVICE AGENT
PAGE 9