universalblue Campana T 60, Инструкция по эксплуатации

Страница: 32 / 41

32
CARBON FILTERS INSTALLATION
CARBON FILTERS ARE NOT INCLUDED WITH THIS
APPLIANCE
Carbon filters can be installed to clean the air by trapping odors on a
porous surface (it absorbs grease, steam and odors), so it filters the
dirty air and returns it to the renovated air. Carbon filters can be
used for a shot time and usually must be changed after three or six
months according to your cooking habit. The procedure for
installing the activated carbon filter is as follows.

Put the pin of the carbon filter into the rectangular hole of the
fan(as per the arrow A shown below)

Push the other side of the carbon filter toward the fan to
make it flat(as per the arrow B shown),and then press filter
into fan.

If you want to remove the filter, press fastener of filter and
remove it by turning anticlockwise.
Make sure the filter is tightly closed. Otherwise, it would
loosen and cause danger
.
When the activated carbon filter is
connected, the suction power will be reduced.