Universal MS-120NI страница 13 Скачать руководство пользователя | Manualshive

Страница: 13 / 33

background image

13

SPECIFICATIONS

RESERVOIR ROLL COVERS

AND 4 OZ. RESERVOIR INK CARTRIDGES

Optional Reservoir Roll Covers are available for both side mount and top mount coder installations. When
installed, these covers enable the use of Universal’s patented 4 Oz. Reservoir Ink Cartridges which re-ink the ink
roll automatically during the printing operation. This system can be installed in the field in a few minutes and can
be used with both Microcell and XF Neoprene Ink Rolls.

Unlike gravity fed systems which will allow ink to flow continuously, Universal’s Reservoir Ink Cartridges feed ink
only during the print cycle. Ink feed stops automatically when the coder is idle.

SIDE MOUNT RESERVOIR ROLL COVERS

are

available in sizes to fit all models of the Midsize Coders
and mount with the standard Axle Cap Screw.

TOP MOUNT RESERVOIR ROLL COVERS

are also

available in sizes to fit all models of the Midsize Coder and
mount with the standard Axle Cap Screw.

FIGURE 9

Note:

The Top Mount Reservoir Roll Covers for the Midsize Cod-

ers are mounting configuration specific. These covers must be
ordered in Right Hand Top Mount or Left Hand Top Mount models
to match the mounting configuration of the coder. Figure 10 shows
an MS-RRC1-RT Right Hand Top Mount Reservoir Roll Cover.

4 OZ. RESERVOIR INK CARTRIDGES

are available

in all colors of #1150 Ink. When a Reservoir Roll Cover is
installed on the coder, a 4 Oz. Reservoir Ink Cartridge can
be inserted into the threaded bottle port on the cover. The
plastic ball tip of the 4 Oz. Cartridge operates in contact
with the face or the side of the Ink Roll. As the Ink Roll ro-
tates during a printing cycle, the plastic ball rotates and
meters out a very small volume of ink to re-ink the roll auto-
matically.

Note:

It is important that the 4 Oz. Reservoir Ink Cartridges should

only be installed on the coder when the pre-inked ink roll becomes
depleted of ink. Installing a Reservoir Cartridge on a fully inked Ink
Roll can cause over saturation of the roll.

FIGURE 10

FIGURE 11

«
...
11
12
13
14
15
...
»

Содержание MS-120NI


































Отзывы:

Нет отзывов

Похожие инструкции для MS-120NI

Бренд: Bartscher Страницы: 22

Бренд: Dairyland Страницы: 21

Бренд: Quincy lab Страницы: 4

Бренд: JB-Lighting Страницы: 32

Бренд: W&H Страницы: 72

Бренд: M-Audio Страницы: 25

Бренд: Hach Страницы: 456

Бренд: Fast Страницы: 60

Optima XR200amx

Бренд: GE Страницы: 46

Бренд: Qlight Страницы: 4

Бренд: B medical systems Страницы: 28

Бренд: Zafferano Страницы: 28

Бренд: Basler Страницы: 33

Бренд: Elma Страницы: 35

Бренд: Qtx Страницы: 6

Sportsman EXG 14/12

Бренд: M&R Страницы: 98

Бренд: siat Страницы: 102

Бренд: Eleiko Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды