Universal HP-100NI, Руководство пользователя

Страница: 9 / 26

Page 9 of 26
9 - Adjust the Ink Roller Eccentric Knob to a
position where the ink roll just contacts the
die faces when the print drum is rotated.
Ink should only be applied to the die face, not the
sides or backing of the die. Excessive contact pres-
sure will result in an excessively wet and smudged
impression.
RE-INKING THE MICROCELL INK ROLL
10 -
Your coder is now ready for use.
After the initial inking process, the Microcell Ink
Roll can be re-inked by carefully squirting a small
amount of ink on the roll surface. It is best to
apply very small amounts of ink down the length
of the roll in multiple places rotating the roll
after each pass. Do not apply an excess amount
of ink or print quality will suffer.
FIGURE 11
FIGURE 12
QUICK START