manualshive.com logo in svg

Universal HP-100NI, Руководство пользователя

Поделиться
Скачать
Universal HP-100NI Скачать руководство пользователя страница 5

Page 5 of 26

SPECIFICATIONS

Figure 1

The Universal HP-100NI, HP-200NI and HP-200 hand printers are designed for
the hand application of printed data on cartons, bags and other flat, porous surface
materials

The HP-100NI and HP-200NI machines are non-indexing or continuous roll de-
signs.  The HP-200 machine is an indexing or spot printing design which allows for
accurate print registration and eliminates duplication of data.

RIBtype® PRINTING DIES

Universal Coders are designed to use
RIBtype® printing dies which have a molded
rib backing.  The ribs on the back of the die
snap into mating ribs in the ribtype drum cover
on the print drum as shown in Figure 1.   Al-
though there are several competitive rib backed
die systems available, it is very important to
note that they are not all made to the same
specifications and are not interchangeable.

Dies are available in many standard character styles and sizes in sets containing
a combination of individual alphabetic and numeric characters or in sets of nu-
meric characters only.  These character sets or “sorts” can be used to make up
text messages and code numbers as necessary.  Dies are also available in
“logo” form in which a complete text message is produced on a single piece of rib
backed rubber.  Logo dies are much faster to change and normally produce better
print quality since they are more dimensionally stable than individual characters
when installed on the print drum.

Universal also offers RIBtype® Metric Die systems for use in countries where
metric character sizes are the standard. The Metric dies are thicker and the rib
spacing differs slightly from the standard printing dies therefore the two versions
are not compatible. To accommodate the differences, the print drums for Metric
dies are machined to a slightly different diameter from the U.S. versions.

The coder model numbers on Metric coders will have a “-T” suffix and the Metric
Drum Covers have a distinct pink color.

METRIC RIBtype® PRINTING DIES

Содержание HP-100NI



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды