5
9: Using secondary Keypad Units to activate additional receivers (GCU or Ultra RX 900):
a. Will any secondary Keypad Units be used to activate additional receivers in the network?
No: There are no additional receivers in the network. Go to step 10.
Yes:
A secondary Keypad Unit defaults to activating receiver #2 when a Pin Number is
entered on that keypad. To activate receiver #3, go to
step 9b
and/or to activate receiver
#4, go to
step 9c
.
b. To have a secondary Keypad Unit activate receiver #3, enter in the Master Pin Number, followed by
58
.
c. To have a secondary Keypad Unit activate receiver #4, enter in the Master Pin Number, followed by
59
.
General Operation and Special Features
10: Using the Keypad Unit:
To use the Keypad Unit, enter any valid Pin Number. With multiple receiver’s, enter the Pin
Number followed by the receiver identity (1-4).
11: Pin Numbers:
User-Level Pin Numbers:
The Wireless Keypad can support up to 5 Pin Numbers with the
OWK5 or up to 250 Pin Numbers with the OWK250, for other users.
-
To add an additional Pin Number, on the Keypad Unit, enter in the Master Pin Number, followed
by
9
. After the beep, enter in a new user-level,
4 Digit,
Pin Number.
The Keypad Unit will give a single beep as the new number is accepted.
Removing User-Level Pin Number:
To remove a user-level pin number, on the Keypad Unit,
enter in the Master Pin Number, followed by
7
. After the beep, enter in the user-level pin number
that you want to remove.
The Keypad Unit will give a double beep indicating that the pin number has been removed or a
triple beep, indicating a pin number has been entered that does not exist.
The Master Pin
Number cannot be deleted.
Temporary User Pin Numbers: 5
Temporary Pin Numbers can be issued with an OWK5 (15 for
an OWK250), for a 1 time only use, within a 24 hour time period.
-
To issue a temporary Pin Number, on the Keypad Unit, enter in the Master Pin Number, followed
by
51
. After the beep, enter in a temporary Pin Number.
-
To limit the temporary Pin Number to a single receiver, enter the temporary Pin Number,
followed by the Receiver ID (1-4), resulting in a five digit Pin Number.
The Keypad Unit will give a single beep as the pin number is accepted.
Changing the Master Pin Number:
To change the Master Pin Number, on the Keypad Unit,
enter in the existing Master Pin Number, followed by
09
. After the beep, press
###
, followed by
the NEW Master Pin Number.
The Keypad Unit will give a single beep as the new pin number is accepted.
12: User Settings:
Keypad Brightness:
When it is dark out, the Wireless Keypad Unit uses an Infrared proximity
sensor to light up the keypad when you come within 5 feet of it or when a button is pressed.
-
To brighten or dim, on the keypad unit, enter in the Master Pin Number, followed by
08
.
-
Immediately enter
1, 2, or 3,
to set the level of brightness.
The Keypad Unit will give a single beep as the new level is accepted. The default level is 2.
