Re
fi
lling the Hydraulic Sec
ti
on
Using oil syringe (part #1179055), unscrew oil plug (ref. #17 / part #9630M5) to re
fi
ll. Screw syringe into
oil port. Begin
fi
lling.
Unscrew syringe nozzle from Riveter and insert OIL PLUG (#17) back into Riveter;
�
ghten Oil Plug
fi
rmly.
Reconnect Riveter to air supply and depress trigger 2-3
�
mes.
Pour hydraulic oil (Texaco R&O-68) or
any equivalent (36cSt-4.3e/50°C) into HYDRAULIC.
GAPPING THE JAW ASSEMBLY (see Figure 1)
1.
With the head o
ff
, use the wrench (Ref. #963026N) provided with the tool
2.
The spacing from the hydraulic sec
�
on to the
�
p of the jaw housing should be 72mm.
3.
Tighten the nut (Ref. # 8 on #7) against the jaw housing coupler to ensure the nut does not
move.
4.
Replace the head over the jaw sec
�
on. Make sure you are using the proper nosepiece for the
proper rivet size. This allows the jaws to open to the appropriate width of the mandrel on each
rivet.
MAINTENANCE (CONT.)
