Universal Air Tools Company Ltd.
Unit 8 Lane End Industrial Park, High Wycombe, Hp14 3By, Uk
Safety Information (continued)
AIR COMPRESSOR AND AIR TOOL SAFETY
1 . Risk of Bursting . Do not adjust the regulator to result in output
pressure greater than the marked maximum pressure of this air
tool .
2 . Ensure the hose is free of obstructions or snags . Entangled or
snarled hoses can cause loss of balance or footing and may
become damaged .
3 . Never leave a tool unattended with the air hose attached .
4 . Do not operate this tool if it does not contain a legible warning
label .
5 . Do not continue to use a tool or hose that leaks air or does not
function properly .
6 . Never direct a jet of compressed air toward people or animals .
7 . Protect your lungs . Wear a face or dust mask if the operation is
dusty .
WARNING: Some dust created by power sanding, sawing,
grinding, drilling and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm . Some examples of these chemicals are:
Lead from lead based paint, crystalline silica from bricks
and cement and other masonry products, arsenic and
chromium from chemically-treated lumber .
Your risk from those exposures varies, depending on how
often you do this type of work . To reduce your exposure to
these chemicals: work in a well-ventilated area, and work
with approved safety equipment, such as dust masks that
are specifically designed to filter out microscopic particles .
Important Warnings - Die Grinders
Specifications
1 . Only use mounted grinding stones or mounted carbide burrs that meet ANSI standards, ISO standards or both .
2 . Never adjust the die grinder, adjust the collets or change the mounted stones or mounted burrs unless the air supply and air hose is
disconnected from the die grinder .
3 . Only personnel trained in the correct methods to adjust collets and change mounted stones and mounted burrs should conduct these
operations .
4 . Always ensure that you are aware of the direction of the sparks being created by the grinding operation and ensure that the sparks are
not directed toward the operator or other persons in the area .
5 . Never use a die grinder close to any explosive or flammable materials or air conditioners .
6 . Only use mounted stones or carbide burrs that have the correct spindle diameter that matches the original collet size provided by the die
grinder manufacturer .
7 . Particular care must be taken not to use metric size mounted stones and mounted burrs with die grinders that have imperial size collets,
or use imperial mounted stones and mounted burrs with die grinders that have metric collets .
Vibration Level (m/sec2): 0 .6
Noise Level (dBA): 74
Collet Size
3mm
Free Speed
70,000 RPM
Air Pressure
90 psi (6 .2bar)
Air consumption
1 .5cfm
Содержание UT8707K
Страница 7: ......
