Universal Robots UR10/CB3, Руководство пользователя

Страница: 107 / 249

The (active) safety planes are shown in yellow and black with a small arrow representing the
plane normal, which indicates the side of the plane on which the robot TCP is allowed to be
positioned. Trigger planes are displayed in blue and green. A small arrow illustrates the side of
the plane that does
not trigger the transition into Reduced mode. If a safety plane has been
selected in the panel on the left side of the tab, the corresponding 3D representation is
highlighted.
The tool orientation boundary limit is visualized with a spherical cone together with a vector
indicating the current orientation of the robot tool. The inside of the cone represents the allowed
area for the tool orientation (vector).
When a plane or the tool orientation boundary limit is configured but not active, the visualization
is gray.
Push the magnifying glass icons to zoom in/out or drag a finger across to change the view.
Safety plane configuration
The
Safety Plane Properties
section at the bottom of the tab defines the configuration of
the selected safety plane in the
Safety Boundaries
panel in the upper left portion of the tab.
Name
The
Name
text field allows the user to assign a name to the selected safety plane. Change the
name by tapping the text field and entering a new name.
User Manual 99 UR10
C
o
p
yr
ig
h
t
©
2
0
0
9
–
2
0
2
0
b
y
U
n
iv
e
rs
a
l
R
o
b
o
ts
A
/S
.
A
ll
ri
g
h
ts
re
s
e
rv
e
d
.