Po
w
erBlaster
™
P
ARTS GUIDE
6
Po
w
erBlaster
™
P
ARTS GUIDE
5
Parts Guide
Quantity
Description
1
PowerBlaster™ Receiver with integrated antenna
1
Mounting Plate for wall mounting PowerBlaster™
4
Screws for wall mounting the mounting plate
1
9V-300mA Power Supply
6 Flashers with 10 foot plug-in cables.
Red Status LED lights
when PowerBlaster
™
receives an RF signal
from an RF series
remote control.
The Mounting Plate
guides enable
PowerBlaster’s
™
matching
guide to slide and “snap”
into place for mounting
on the wall.
Front blaster sends
Infrared commands to all
A/V components in the
same cabinet space.
Red Power LED
lights to indicate when
PowerBlaster is
plugged into an active
AC outlet.
Using the four enclosed screws,
you can choose to fix the mounting
plate to a wall or the back of your
component cabinet.
The Mounting Plate
MRF100B Manual 1/2/06 1:39 PM Page 7
™
