Universal Remote Control MRX-4IR, Руководство пользователя

Страница: 6 / 20

MRX-4IR N
ETWORK
B
ASE
S
TATION
Rear Panel
The rear panel ports are:
DC 12V Power : Plug in the included 12V DC 1A power supply.
IR Outputs : Connect an included 3.5mm IR emitter to each of the
four IR outputs. Adjust the IR output signal strength for port 1 using
the attenuator located on the bottom of the unit.
LAN Connection : If a wired connection is needed, this port uses a
standard Ethernet (RJ-45) plug to communicate via the local area
network.
Page 3