1.3 Specifications
Operation System:
Integrated preprogrammed & learning
infra-red remote control system
Compatibility:
Preprogrammed with code library of
Televisions (TVs), Video Cassette
Recorders (VCRs),
Satellite / Digital
Satellite Receivers (SATs), Cable
Converters (CBLs) and Digital Video
Disc Players (DVDs)
Memory Capacity:
226 learning commands
Memory Retention
after Battery
Disconnection:
Non-volatile and permanent memory
Display Panel:
Negative touch screen LCD
EL Backlighting:
Bright-blue EL backlight
Operating Distance: 8 metres (25 feet)
Power Requirement: 4 x AAA size batteries (Alkaline is
recommended)
Dimensions:
163 x 54 x 19.5 mm
Weight :
130g (without batteries installed)
180g (with batteries installed)
For improvement purposes, specifications and functions are subjected
to change without priority notice.
1.4 How to Install Batteries
Note: Battery Low
If the icon “ ” is shown on the display panel, it shows
that the battery level is low. You must replace the battery
with a new one to ensure proper functioning. Do not use
old and new batteries together as old batteries tend to leak.
Alkaline batteries are recommended.
1. Open the battery cover.
2. Follow the polarity symbol shown in the battery
compartment.
3. Place the batteries inside.
4. Replace the battery cover.
3
4
❑
After installed batteries, your HTM1000 prompts at TV mode.
If it is in-active for about 15 seconds, it goes to power saving
(sleep) mode and shut down the display. Simply, touch the
screen panel to activate the unit again.
Note: When in power saving (sleep) mode, the hard key
section is still available for command.
❑
Tap any of the Device Mode Key on the screen to enter the
corresponding device mode. e.g. . The “ ” icon will
change to blue color.
❑
Tap a key directly to send out the corresponding infra-red
command.
Getting Start
2
2.1 Hard Keys
There are 9 hard keys. They transmit IR command corres-
ponding to the selected device.
•
Power ON/OFF
• P+
Program up or channel up
• P–
Program down or channel down
• VOL+
Volume up
• VOL–
Volume down
• GREEN
For teletext and fastext function
• RED
For teletext and fastext function
• YELLOW
For teletext and fastext function
• BLUE
For teletext and fastext function
(Remark: G/R/Y/B buttons are also used for supporting
some Satellite Receivers and Cable box)
English
English
2.2 Key Tone
When you tap any key, there is a short beep sound.
2.3 Backlight
Bright-blue EL Backlight will be turned on once you tap
the remote. The backlight will be turned off automatically
if the remote is not active for 15 seconds.
