15
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control capabilities
are locked to the cable converter. The affected keys* are
0
~
9
,
CH+
,
CH-
,
ENTER
, and
LAST
. This will guarantee that
you do not inadvertently change a channel on your TV or
VCR. However, you can de-activate this feature to allow full
access to these keys in the TV and VCR modes.
*NOTE: This feature does not affect the
AUD
mode.
To De-Activate Channel Control Lock:
1.
On the remote control, press
CBL
once; it will
blink once. Then press and hold
SETUP
until
the
CBL
key blinks twice, then release
SETUP
.
2.
Enter
9
-
7
-
3
. The
CBL
key will blink twice.
3.
Press
CH-
once. The
CBL
key will blink
four times.
4.
Now, the remote control will provide TV and
VCR channel-control capabilities while in the
TV or VCR mode.
To Re-Activate Channel Control Lock:
1.
On the remote control, press
CBL
once; it will
blink once. Then press and hold
SETUP
until
the
CBL
key blinks twice, then release
SETUP
.
2.
Enter
9
-
7
-
3
. The
CBL
key will blink twice.
3.
Press
CH+
once. The
CBL
key will blink twice.
4.
Now, regardless of what mode you select
(except
AUD
), only the channel control
capability of your cable converter will be
accessible.
Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 15
