Expired Samples
The Cap Track can provide you with a list of all samples older than a specific cutoff point. The menu for this
can be found under “DATABASE” then “Expired Samples”. Pressing this button will list each rack older than
the cutoff date, from oldest to newest.
Pressing “REMOVE” will flag the rack as removed but not delete any data. At this point you can find the rack
under the “Racks in Transit” button. Which lists in the same manner, but sorted just by number and does not
allow any further changes. The data will remain in the Cap Track until the rack is used for normal operation
again. At which point it will confirm the data removal (once agreed to, this data can never be recovered) and
populate the rack with new samples.
Manager Password
The Cap Track is equipped with a manager password, “MANAGER” by default, which limits certain functions to
authorized individuals. The password can be changed in the “SETTINGS” menu by pressing “Change
Password”.
Rack Expiration Time
To change the cutoff time for “Expired Racks”, go to the “SETTINGS” screen, and tap on the “RACK CUTOFF”
box. This will prompt a manager password. Once the password has been entered, assuming it’s valid, a set of
arrows will appear and allow the cutoff to be changed between 1 and 9 days.
Change Language
The language setting can be found in the “SETTINGS” screen. Tap the arrows on either side of the box labeled
“LANGUAGE” to cycle through supported languages. This setting is saved automatically.
Change Timezone
The timezone setting can be found in the “SETTINGS” screen. Tap the arrows on either side of the box labeled
“TIMEZONE” to cycle through supported UTC timezones. This setting is saved automatically.
Common time zones:
UTC -8
PACIFIC STANDARD TIME
UTC -7
MOUNTAIN STANDARD TIME
UTC -6
CENTRAL STANDARD TIME
UTC -5
EASTERN STANDARD TIME
Change Keyboard
The Cap Track is designed to use a keypad for barcodes that has keys for 0-9 and A-F, which is the default. In
the “SETTINGS” screen, you can change to a full “QWERTY” keyboard by toggling the “HEX KEYPAD” button
to the red position. This setting is saved automatically.
7
