3. Enter the first of the four-digit codes for your cable box (it may be necessary
to enter more than one code before finding the one that works for you).
4. If the code you have entered is valid, the red LED light should blink twice. To
ensure that you’ve entered the correct code, point your watch remote at your
cable box and press
Power. If your cable box turns off, you have entered the
correct code.
5. If the code you have entered is invalid, you will see one long blink and your
cable box will not turn off when power is pressed. If this happens, follow steps
2 through 4 above trying all codes on your list until you find one which turns off
your cable box.
6. To set up your
Watch Remote Control to control your TV, follow steps 2
through 5 above but in step 2, turn on your TV when starting this step and
press the
TV key rather than the
Cable
key.
5
Magnavox
1132, 1122,
1223
Majestic
1112
Marantz
1132, 1122
Matsushita
1232
Megatron
1222, 1144
Memorex
1212, 1232,
1234, 1211,
1222, 1223,
1133, 1112
Midland
1123, 1113,
1124
Mitsubishi
1143, 1211,
1222, 1114
Motorola
1143
Multitech
1224
NAD
1213, 1222,
1214
NEC 1122, 1114,
1133
NTC
1142
Nikko
1122, 1222,
1142
Onwa
1224
Optimus
1212, 1232,
1214
Optonica
1143
Orion
1231, 1234,
1223
Panasonic
1124, 1232
12
Watch Remote Manual.0814.qxd 8/14/01 4:49 PM Page 7