Universal Electronics Sirius Conductor, Инструкция по установке и эксплуатации

Страница: 44 / 78

[
Wireless Controller Operation
]
Codes section beginning on page 53. (For example, for a CD player you could enter code
0180 .)
learning key functions
To have the wireless controller learn a key function from a device’s remote control:
Press and hold
SET
until the LCD displays
Initial Setup
. Use
Scroll Left
( ) or
Scroll
Right
( ) to go to
Advanced Setup
and press
OK
.
From
ADVANCED SETUP
press Scroll Left ( ) or Scroll Right ( ) to go to
LEARN FUNCTION
.
Press OK .
The LCD displays
Add Learn Key
. Press OK .
The LCD displays
FIND mODE TO LEARN. AND PUSH OK
. The bottom line of the LCD displays
the device type (for example,
DVD
). Press
OK
to select or press
Scroll Left
( ) or
Scroll
Right
( ) to select another device and press
OK
.
The LCD displays
Align Remotes PUSH OK
. Place the wireless controller and the remote
within two inches of each other as shown in Figure 1 and press OK .
2"
The remote displays
SELECT THE KEY TO LEARN
. Press the key you want to learn on the
wireless controller, any key except
SET
,
SIRIUS
,
OK
,
Scroll Left
( ), or
Scroll Right
( ).
The LCD displays
WHEN BACKLIGHT TURNS OFF PUSH TEACHING KEY
. The backlight then turns
off and the LCD display reads
LEARNING NOW! PRESS TEACHING KEY
. Press the teaching key
on the device’s remote control.
If the learning is successful, the backlight turns back on and the LCD displays
SUCCESS! PUSH OK TO LEARN PUSH SET TO EXIT
.
Press OK to learn another key or press SET to exit the learning mode. If you press OK ,
the LCD display returns to step 5 to learn another key.
1.
2.
3.
4.
5.
6.
7.
8.
9.
figure 1 figure 1