If you need help...
•
Refer to the NevoStudio Pro Design Guide
•
Refer to the online knowledge base at www.mynevo.com
•
Contact your distributor
•
Contact Technical Support
NOTICE:
Nevo, Nevo
Q50
, NevoStudio, NevoStudio Pro and
NevoConnect are registered trademarks or trademarks of
Universal Electronics Inc., in the United States and/or other
countries. Other product and company names may be trademarks
of their respective companies.
FCC NOTICE:
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide a reasonable protec-
tion against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet or a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help
Operation is subject to the following two conditions: (1) this product
may not cause harmful interference, and (2) this product must accept
any interference received, including interference that may cause
undesired operation.
This equipment has been verified to comply with the limits for a class
B computing device, pursuant to FCC Rules. In order to maintain com-
pliance with FCC regulations, shielded cables must be used with this
