15
PROGRAMMING CHANNEL CONTROL LOCK
By default, the remote control’s channel-control
capabilities are locked to the set-top box. The affected
keys
*
are
1
through
0
,
CH+
,
CH-
,
ENTER
, and
LAST
. This
guarantees that you do not inadvertently change a
channel on your TV or VCR. However, you can de-
activate this feature to allow full access to these keys in
the
TV
and
VCR
modes.
*
NOTE:
This feature does not affect the
AUD
mode.
Unlocking Channel Control
Now the remote control provides TV and VCR channel-
control capabilities while in the TV or VCR mode.
Locking Channel Control to MTS
Now, regardless of what mode you select (except
AUD
),
the channel keys only change channels on your set-top
box.
CHANGING VOLUME LOCK
Volume Lock allows you to control the volume through
the device identified as having your primary speaker(s),
regardless of which mode you are using. On theAtlas
DVR/PVR IR/UHF Remote, Global Volume Lock is set to
1.
On the remote control, press
MTS
once; it
blinks once. Press and hold
SETUP
until the
MTS
key blinks twice.
2.
Enter
9 7 3
. The
MTS
key blinks twice.
3.
Press
CH-
once. The
MTS
key blinks four
times.
1.
On the remote control, press
MTS
once; it
blinks once. Press and hold
SETUP
until the
MTS
key blinks twice.
2.
Enter
9 7 3
.The
MTS
key blinks twice.
3.
Press
CH+
once. The
MTS
key blinks twice.
