18
Using the Master Power Key
You see the devices turn on or off according to the
programmed sequence.
Clearing the Master Power Key
RE-ASSIGNING DEVICE KEYS
The Atlas DVR/PVR IR/UHF Remote can be set up to
control a second device of an already-assigned type. For
example, to have the unit control a TV, a set-top box, and
two
DVD players, re-assign the unused
AUX
key to
operate the second DVD Player as follows:
NOTE:
AUX
is preset at the factory to control an RCA
VCR. Performing the steps below overwrites
those settings.
The
AUX
key is now ready to be programmed for your
second DVD player. See “Programming Device Control”
on page 9. To re-assign other device keys, repeat these
and substitute the key sequence using the following
chart:
1.
After programming, point the remote control
at the devices and press and hold
PWR
for 1.5
seconds.
1.
On the remote control, press and hold
SETUP
until the last-selected device key blinks twice.
2.
Enter
9 9 5
. The last-selected device key
blinks twice.
3.
Press
PWR
. The last-selected device key blinks
twice and the remote exits from
programming.
1.
On the remote control, press
AUX
once; it
blinks once. Then press and hold
SETUP
until
the
AUX
key blinks twice.
2.
Enter
9 9 2
. The
AUX
key blinks twice.
3.
Press
DVD
once, then press
AUX
once. The
AUX
key blinks twice.
