SEARCHING FOR YOUR CODE
If your TV,VCR, Cable Converter or Audio Component
does not respond to the Millennium 4 after trying all of
the codes listed for your brand, or if your brand is not
listed at all, try searching for your code.
For example, to search for a code for your TV:
1.
Turn on your TV.
2.
On the Millennium 4, press and hold
SETUP
until the LED blinks twice, then release
SETUP
.
3.
Enter
9
-
9
-
1
. The LED will blink twice.
4.
Aim the remote control at the the TV and slow-
ly alternate between pressing
POWER
and
TV
.
Stop when the TV turns off.
NOTE: In the search mode, the Millennium 4 will
send IR codes from its library to the selected compo-
nent, starting with the most popular code first.
5.
Press
SETUP
once to lock in the code.
6.
To search for the codes of your other compo-
nents, repeat steps 1 through 5, but substitute
the appropriate key (i.e.,
VCR
,
CBL
, or
AUDIO
)
for the (VCR, Cable, or Audio) component you
are searching for.
26
Millennium 4 Mnl M4090 7/23/99 9:34 AM Page 26
