Universal Electronics Hashi, Руководство пользователя

Страница: 12 / 30

Hashi User Manual
11
It is specified in bytes, determines whether packets will be fragmented. Packets exceeding the
2346 byte setting will be fragmented before transmission.
2. RTS Threshold:
This value should remain at its default setting of 2347. If inconsistent data flow is a problem,
only a minor modification should be made.
3. Beacon Interval:
Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value.
100 is default setting and is recommended.
4. Preamble Type:
The long preamble can reduce the guard interval packet therefore increasing the data capacity.
However, it’s less reliable and may create higher data loss.
5. IAPP:
The default setting of Inter-Access Point Protocol is enabled.
6. Protection:
The default setting of BG protection is disabled.
7. Aggregation:
If it is enabled, the packets will be aggregated before they are forwarded. The default setting of
Aggregation is enabled.
8. Short GI:
Enabled it can reduce the guard interval time therefore increasing the data capacity. However,
it’s less reliable and may create higher data loss.
9. WLAN Partition:
The default setting of WLAN partition is disabled.
10. STBC:
The default setting of Space Time Block Code is disabled.
11. 20/40MHz Coexist:
The default setting of 20/40MHz Coexist is disabled.
12. RF Output Power:
The default setting of RF Output Power is 100%.
¾
Security
It is recommended to enable encryption on Hashi. Please establish connectivity before enabling
encryption.