Univers by FTE U4149, Руководство пользователя

Страница: 24 / 30

PAG . 24
rev 1.0
English
3. Load Default Timer Setting When you enter “Load Default
Timer Setting”, you will see the window like below:
•Press [OK] key on “Load Default Timer Setting”, it will show
“Inpute Password” dialogue.
•After you input the correct password, there will show a
warning message to inquiry you “All Timers will be cleared,
continue?”
•If you select “Yes”, it will clear all the timer.
•You can press [Exit] key to exit.
5.6 OSD SETTING
When you input to “OSD Setting” menu, you will see a screen
like below (OSD 39):
1. Subtitle Display: You can press [
] key to select “On” or
“Off”. If the current channel has subtitle information, it will
be showed up while this function is “On”. If this function is
“Off”, there won’t show up subtitle information even if the
current channel has subtitle information.
2. OSD Timeout: When you switch channels in full screen,
there will show up some information about current channel
on the lower of the screen. And regarding to the duration
of these information show up on the screen, you can press
[Left/Right] key to set the time. The range of the duration
is “1 second ~ 10seconds”.
3. OSD Transparency: Besides the setting of “OSD Menu
Style”, you also can set the transparency of OSD. You can
press [Left/Right] key to select the values. There are 5
levels of transparency, 10%, 20%, 30%, and 40% and
“NO” (means no transparency function).
4. Load OSD Setting Default: If you are not satisfy with your
setting, you can move highlight to this item and press [OK]
key to reset parameters as default value.
5.7 PARENTAL LOCK
You can set a password for anyone who wishes to operate in
the “Installation” menu. And you can also set the password
for the lock channels. (How to set the lock channel please
refer to LOCK) Here will show you how to setting and how to
revising the password.
1.In “Parental Lock” function, press [OK] key, there will pop
an dialogue for you to input the password. The default
password is “0000”. When you input the correct password,
you will see a screen like below(OSD 40):
2.Menu Lock determining that when user wish to enter
“Installation” menu, whether have to input Password or not.
If the setting of “Menu Lock” is “Yes” which means user
have to key in password, set “No” means unlock.
3. Channel Lock determining that when user wish to play
SYSTEM SETUP
OSD 39
OSD 40