Univers by FTE U4132, Руководство пользователя

Страница: 21 / 50

PAG . 21
English
rev 1.0
duration in the fast recording.
- If you push “Exit”: it will make the fast recording and will
obviate the temporised events that will get in conflict. Anyway,
in the moment of the temporised event the user are inquired
again about if he wants to carry out the programmed event. In
case of no response, it will continue with the fast recording.
In order to stop a recording before the ending of the programmed
length, press the [Stop]-Key. A new window will be shown in
order to confirm the end of the recording (OSD 16). If you
press the Key [Rec], the recording will continue. Press the key
[Stop] again to end the recording manually, if you want to end
the recording before the programmed length.
2.24. PVR
It opens directly the recording administration menu (Chapter
7.1).
2.25. TIME SHIFT
If you are watching a program and you want to stop it and
later continue watching it, press the key [
►
II
] on the remote
control. The program will stop and will be stored on the hard
disk of your receiver. The OSD will show you the time since the
function is activated (OSD 17).
When you wish to continue watching the program, press the
button [
►
II
] again. If the information is on the hard disk, it is
possible to fast forward and reward. Pressing the button [
■
] or [
■
] several times, you can settle the speed of forward.
Options: 2x, 4x y 8x.
You can also use the keys [
■
] or [
■
] in order to go
forward/reward.
Using the key [Info] you can see the time difference between
your reproduction and the real time.
In order to leave the Time Shift option, press the key [stop] to
equal the difference between the reproduction time with the
real one. When you press [Stop] again, it will appear a window
to ask for the confirmation to finish the Time Shift (OSD 18).
If you press the key [Rec], it will continue in Time Shift mode.
Press the key [Stop] again to leave the Time Shift settings.
2.26. PIP FUNCTION
In this receiver, the PiP function (Picture in Picture) allows you
to visualize 2 channels of the same transponder at the same
time
1. Press the [PiP] key. A little screen that shows the channel
you were visualizing will appear. You can change the channel in
the same TP in the main screen and continue watching the first
OSD 16
OSD 17
OSD 18
BASIC OPERATIONS