Univers by FTE U4125, Руководство пользователя

Страница: 37 / 39

PAG . 37
English
rev 1.1
6.6. SATCODX AUTO PROGRAMMING
This function is using the tables of the SatcoDX websites to
update your channel and satellite lists.
1. Start the SatcoDX application on your PC.
2. Select “SatcoDX Auto Programming” item from the “Tools”
menu and press [OK]. The screen will show the message “OK
to Proceed” (OSD 84).
3. Press [OK] again and you will see the message “Ready to
Download” (OSD 85).
4. In the PC application set the Baud Rate to 115200 and start
the download procedure.
! Caution: The new download channels will delete the original
channels list. Please be careful before using it.
6.7. SMART CARD
In this option, you can fi nd information about the conditional
access system. If there is no card or it is placed incorrectly,
information about “No card” o “Unknown” will be showed on the
screen. With a FELEC-CAS card, information about the card
will be showed (OSD 86).
Note: Card must be inserted with chip in upper side.
6.8. CI
In this menu option you will fi nd information in referrence with
the Conditional Access. If there is not interface or it is not
correctly introduced, it will appears in the screen “CAM Not
Available” (OSD 87). With the CI module correctly inserted, the
card data (OSD 88) will appear. Please, follow the instructions
which will appear in the screen.
TOOLS
OSD 85
OSD 86
OSD 87
OSD 88