PAG
.
13
English
rev 1.1
PANEL & REMOTE CONTROL DESCRIPTION
1. PANEL & REMOTE CONTROL DESCRIPTION
1.1. FRONT PANEL DESCRIPTION
1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver,
you have to use the switch on the back of the receiver.
2. STAND-BY-LED: Shows if the receiver is in Standby mode (when LPC mode is ON).
3. LOCK LED: Indicates a suffi cient signal level at the IF IN input.
4. DISPLAY: 4 Digits to display the program numbers.
5. IR-SENSOR: Reception sensor for the IR remote control signals.
6. BUTTONS: These buttons allow controlling the main functions of the receiver, and
provide the same functionality as the remote control ones.
7. Conditional Access: Opining front door, you can access to conditional access system.
1. S/PDIF: Optical output for digital audio (AC3).
2. IF IN: Satellite input.
3. S/PDIF: Coaxial output for digital audio (AC3).
4. TO TV: Modulator output for the connection to a TV set.
5. ANT IN: Antenna input for the terrestrial antenna.
6. RS-232: Serial Port allowing software upgrades.
7. AC IN: Mains input cable.
8. POWER ON/OFF: Allows to completely switching off the receiver.
9. RCA A/V
10. IF OUT: Satellite output for cascading to other devices.
Note: The operation of another receiver at the same time is only possible with limited channel
selection.
11. TV SCART: Output SCART for the connection to a TV set.
12. VCR SCART: Output SCART for the connection to a VCR set.
1.2. REAR PANEL DESCRIPTION
1
2
7
8
9
11
4
5
6
3
12
10
1
2 3
4
5
6
7
Содержание U4125
Страница 1: ...U4125 ...
