5
This appliance has a ‘Y’ type supply cord connection and must be installed by a licensed
electrician, who will ensure that the stove is correctly connected and
safely earthed
.
After installation, inspect the unit to make sure all connections are secured and
professionally installed and tightened.
If the supply cord is damaged for whatever reason, it must be replaced immediately.
The rated current is printed on the serial number label which is attached to the upper
back panel of the stove.
IMPORTANT!
The appliance must not be connected through an earth leakage system, please refer
to
S.A.N.S. 10142.
The appliance must be connected to the mains through an isolator switch with a
minimum clearance of 3mm between the contacts.
OVEN and HOB CONNECTION TO POWER SUPPLY (
According to different models):
CONNECTION TO THE POWER SUPPLY
