3
Part. 14000101
Rev. 12/2019
®/™ ©2019 Unity Laundry Systems. All rights reserved.
24. DO NOT reach and/or climb into the tub or onto the washer, ESPECIALLY if the wash drum is moving. This is an imminently
hazardous situation that, if not avoided, will cause severe personal injury or death.
25. All installations required for the proper operation of the machine MUST be carried out by a duly accredited Registered
Installation Contractors, in compliance with the legal regulations applicable in the country of use.
26. Avoid carrying out any action on the machine without having first read and understood the machine’s Installation and
Operating Manuals, paying special attention to the Safety Instructions.
27. Carrying out transport, installation, inspection routines, adjustments, maintenance, repairs, cleaning or any work on the
machines without applying safety measures or having the necessary technical know-how can lead to ELECTRICAL SHOCK
OR SERIOUS ACCIDENTS.
28. When tools designed for specific transport, installation, maintenance and repair routines are available, their use is
compulsory in order to avoid unnecessary risks.
29. Before carrying out any procedures on machines fitted with pneumatic or hydraulic circuits:
• Make the machines COMPLETELY SAFE by following the instructions set out in the corresponding Manuals or by wedging
them with wooden blocks where necessary.
• Bear in mind that working on a component without having previously understood the role that it performs in the circuit as a
whole involves a high risk of suffering a SERIOUS ACCIDENT.
30. BEFORE CARRYING OUT ANY inspection routine, adjustment, maintenance, repairs, cleaning or any work on the machine,
DISCONNECT IT FROM ALL THE ENERGY SOURCES.
• COMPLETELY disconnect the machine from the power supply and prevent the possibility of accidental reconnection by
mechanically locking the automatic external switch and/or the switch breaker. Stopping the machine with the NORMAL
STOP key or push-button is not enough.
• Disconnect the electrical connection of any circuit external to the machine; for example, external dosing equipment,
external vending units, folders or ironer feeders. These circuits are independent of the supply to the machine.
• Before beginning any procedure wait for at least five minutes after the electrical disconnection, to eliminate risk of residual
voltage.
• Close and mechanically lock the manual supply valves.
• Check that the water bath has COMPLETELY drained, that no part of the machine is at an excessively high temperature
and that no parts are in movement through inertia.
31. DANGER! Some fault localization procedures require checking at different points of the electric circuit with the machine
connected to the power supply and other supply sources. When carrying out these procedures, respect the following
instructions:
• The appropriate checks must be carried out by ONLY ONE PERSON.
• During these procedures, ONLY remove the protective covers from the electric circuit and/or the inverter. Never remove the
covers protecting the moving parts of the machine.
35. Before the washer is removed from service or discarded, remove the door to the washing compartment.
36. Failure to install, maintain, and/or operate this washer according to the manufacturer’s instructions may result in conditions
which can produce bodily injury and/or property damage.
37. THE MANUFACTURER ACCEPTS NO RESPONSIBILITY IF THESE SAFETY INSTRUCTIONS AND ALL THE
INFORMATION IN THE CORRESPONDING MANUALS ARE NOT FOLLOWED. KEEP THESE INSTRUCTIONS IN A SAFE
PLACE.
00 SAFETY INFORMATION
