UNITY LAUNDRY SYSTEMS UTS29 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 49

UNITY LAUNDRY SYSTEMS UTS29 Скачать руководство пользователя страница 22

22

Part. 14000002

Rev. 06//2021

®/™ ©2022 Unity Laundry Systems. All rights reserved.

INSTALLATION

4. Attach the external supply hoses to the ports at each of the drilled holes.

5. Secure with proper clamps.

6. Make the electrical connection as specified. NOTE: Chemical electrical connections for the UTS29 are located inside

of the washer below the transformer. Chemical electrical connections for the UTS40 & UTS62 are located on the

back of the washer.

NOTE: Do not attempt to make chemical injection supply pump electrical connections to points other than those

provided specifically for that purpose by the factory.

3.8 REMOVAL OF SHIPPING BRACKETS AND DOOR CABLE - UTS29

WARNING

DO NOT REMOVE THE SHIPPING BRACKETS BEFORE PLACING

THE WASHER IN ITS FINAL LOCATION.

NEVER START THE MACHINE UP WITHOUT FIRST REMOVING THE

SHIPPING BRACKETS.

NON-COMPLIANCE WITH THIS PRECAUTION MAY CAUSE SERIOUS

PHYSICAL DAMAGES TO PEOPLE AND IRREPARABLE DAMAGES

TO THE WASHER. THE WARRANTY DOES NOT COVER THIS

INCIDENCE.

After positioning, remove the lower front and back panels and remove the four shipping brackets that were used for

transportation support. Save the shipping brackets. If the washer ever needs to be moved to another location, replace the

shipping brackets prior to moving the machine.

FRONT SHIPPING BRACKETS

REAR SHIPPING BRACKETS

«
...
20
21
22
23
24
...
»

Содержание UTS29


















































Отзывы:

Нет отзывов