Unitronics V200-18-E5B, Быстрый старт

Страница: 5 / 12

3/05 V200-18-E5B
S n a p - i n I / O M o d u l e
Unitronics 5
pnp (source)
Analog Inputs
„ Shields should be connected at the signal source.
„ To set the inputs:
-
Use the appropriate wiring as shown below.
-
Open the device and set the jumpers according to the instructions beginning on page 6.
„ Inputs may be wired to work with either current or voltage.
„ All inputs share a common COM signal.
current current/voltage
i4 Automation Ltd - 01480 395256