35
34
Notice 4:
FCC/IC RF Radiation Exposure Statement
This equipment complies with FCC/IC radiation exposure limits
set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
More details can be found in the data sheet which can be
downloaded from www.unitron.com.
0678
The CE symbol is confirmation by Unitron that this
Unitron product meets the requirements of the R&TTE
Directive 1999/5/EC on Radio and Telecommunication
Terminal Equipment. The numbers after the CE symbol are the
numbers of consulted certified bodies under the above mentioned
directives. The alert sign means that potential restrictions on its
use are applicable in one or more EU Member States.
This device is a class 2 device and can be operated in the EU
member states without restrictions for indoor use, but must not
operated outdoors in France.
Operating conditions:
This device is designed such that it functions without
problems or restrictions if used as intended, unless
otherwise noted in these user guides.
0°to 55° Celsius and relative humidity of
<
95% (non
condensing).
Notice 3:
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules
and ICES-003 of Industry Canada.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
