MEC2 INVERTED METALLURGICAL MICROSCOPE
UNITRON
®
73 Mall Drive, Commack, NY 11725 • 631-543-2000 • www.unitronusa.com
7
Insert the lamp gently but firmly into the
socket.
Do not touch the halogen bulb with bare
fingers. Doing so will shorten the service life
of the lamp.
If you leave fingerprints on the lamp surface,
clean it with a soft cloth or lint free paper.
4.
Align the socket
①
with the pins
③
, and the
bolts
②
with the jacks
④
. Then insert the
lamphouse cover completely into place.
(Figures 3 & 4)
Installing the Stage Plate
(Figure 5)
The stage plate
①
is installed by placing it in the
center of fixed stage.
Installing the Eyepieces
(Figure 6)
1. Remove the protective caps on the eyepiece
tubes.
2. Insert the eyepieces into eyepiece tubes until
they are completely inserted.
Installing the Video Adapter
(Figures 7, 8, & 9)
Insert the video adapter tube (Figure 7) into the
trinocular viewing head (Figure 8) and tighten
the thumb screw (Figure 9 – next page).
Fig. 4
Fig. 5
Fig. 6
Fig. 8
Fig. 7
