15 01/2018 - V1
Classic
P3 60-150 A
Electrical installation
Ac
tu
al v
al
ue
co
nn
ec
tio
n
For 1 quadrant controls with small control ranges (up to 1:50) and little demands on accuracy and
dynamic the armature voltage can be used as actual value signal.
The actual value lines must be protected by two fuses of 0.1A/500V installed directly in the
armature voltage.
For armature voltages superior to 180V two additional drop resistors must be pre-connected,
thus, the module EXZU-UA (additional equipment) can be used. It contains two fuses and two
resistors in an insulated housing.
P3-A054-Ankerreg
