Unitek DS-405.2, Руководство пользователя

Страница: 46 / 53

Control connection
45 04/2019 - V01 DS 400.2
SI
N C
OS
1
Vs
s C
ONNEC
TI
ON
5.8 SIN COS 1Vss CONNECTION
Only for version SC
DS-BAx-DPC/E-DS-400-SINCOS-Anschluss-3
Incremental encoder with 2 analog
sinusoidal counter tracks and 1 zero
track plus 2 commutating tracks.
Differential inputs 1Vss.
Max. counting frequency 500 kHz
The incremental encoder is galvanically
connected with device zero (GND).
Supply voltage 5 V, provided by the
servo.
The resolution is automatically adjusted
to an optimum.
DS/BAx/DPC – DS-400-stecker-sincos
Use only motors with SIN/COS encoders (SC) which have been approved by the manufacturer.
Observe the motor specific connection data sheet (SC)!
Connector X7 15-pole D-connector
Connecting cable 4x signal conductors, twisted and shielded min. cross-section 0.14 mm
2x signal conductors, shielded min. cross-section 0.14 mm
4x supply lines, temp min. cross-section 0.5 mm
Cable type (4x(2x0,14)+(4x0,14)C+4x0,5)C
For link chains use appropriate cables!
Cable length for >25m the cross-section of the cable used must be increased by one
grade
Shield connection across connector X7 connect the shield to the connector
housing
across the motor connector connect the shield to the connector
housing
Setting parameter see software Manual DS
Steckerbelegung
Lötseite
M, Stiftkontakt
Temperatur
Motor
100nF
5
12
T-Motor
M
ot
or
-S
te
c
k
er
D-Stecker X7
TMS
SI
N
/C
O
S
1
V
s
s
10 VCC +5V
1 ka+
4 ka-
TEMP
DS xx/BAxx
120
2 kb+
11 kb-
120
3 kr+
9 kr-
120
14 kc+
15 kc-
1000
7 kd+
13 kd-
1000
1k
VCC +5V
GND
6
VCC +5V
GND
GND
SF1
SF0
Faktor
D-connector X7
M
ot
or
-c
on
ne
c
tor
Schirm am Steckergehäuse
Shield at connector housing
Schirm am Steckergehäuse
Shield at connector housing