Unitek Peco WELD SENTRY 2, Руководство пользователя

Страница: 19 / 49

Page 14 WELD SENTRY 2
SECTION 3 - OPERATION
OPERATING STATES
There are 6 "States" possible for Weld Sentry operation; HELP, MENU, RUN, STANDBY, PROGRAM,
and TRIGGER.
MENU STATE
Press [MENU] to display the Main menu and access the
Weld Sentry options and utilities. Unless instructed
differently, press [RUN] to exit the Menu state and
SAVE changes made to any of the configurations.
HELP STATE
At any time press [HELP] to enter the Help state to
access the on-line users manual. Help messages are
context sensitive and offer information related to the
current screen or cursor position. Select System Help
from the Main Menu for installation help and
specification information. Also, displayed across the
bottom of all screens are the correct keys to use for the
current operation.
RUN STATE
The Run state screen is shown at right and is indicated
by the word
■ READY ■ displayed at the bottom right
of the screen. In the RUN state the Sentry is ON and
ready to monitor welds. When any other screen is
displayed, press [RUN] to display the RUN state screen.
STANDBY STATE
The Standby screen looks the same as the Run screen
except the word ,
■ STANDBY ■ is displayed at the
bottom right of the screen. In the STANDBY state the
Sentry is not ready to monitor. This can be due to
several reasons:
(a) The Sentry Status is OFF.
(b) The printer is busy.
(d)
The Sentry is waiting for a "Start" signal.
(c) An 'OFF' time is occurring during a monitoring schedule.