3
REMOTE CONTROL
1.
Put two batteries (TypeAAA,1.5V) into the battery compartment of the remote control and close
the cover until it clicks into place. The maximum distance for transmitting signals from the
remote control to the fan is 6 meters. Make sure that no objects are hindering signal
transmission.
2.
Take the protective film off the remote control.
3.
Use only batteries of TypeAAA,1.5V and after replacing the old batteries dispose of them for
recycling and according to your local regulations.
4.
If you do not wish to use the remote control for a longer period (4 weeks or more), take the
batteries out of the remote control.
OPERATING INSTRUCTIONS
Ensure voltage used corresponds with the voltage indicated.
b) Use the remote control to select the speed.
c) Tilting angles-By pushing the tilt-guard, you can adjust the fan to your desired elevation.
d) Never touch the blades with hand or any object!
e) Do not pull the cord grip the plug itself. If the cord or plug are get damaged, They must be checked
by a qualified repairer before further use.
CLEANING AND MAINTENANCE INSTRUCTIONS:
To clean:
Disconnect the power cord from the mains. Remove the guard and the blades carefully.
Do not drop the blades! First use soft cloth with light soap to clean off oil stains. Then wipe and polish
with dry cloth. Never use polish or any corrosive liquid that will damage the paint, metal or plastic! Put
back the blades and lock the guard securely before use.
WARNING:
Unplug from electrical supply source before cleaning. After servicing, any safety device
(including grilles and blades) must be reinstalled or remounted as previously installed. Use soft damp
cloth then wipe with dry cloth. Do not use harmful cleaners. Do not bend the blades.
If the plug and supply cord are damaged, it must be replaced by the manufacturer, its
service agent or a suitable qualified person in order to avoid a hazard
