Installation Instructions
Before using the Wall fan for the first time, read all instructions carefully and keep them in a
safe place for future reference.
Remove all the sub-assemblies from the box.
NOTE: Do not operate the fan until it is completely assembled.
1. At the desired location, place the mounting plate on the wall and mark out four holes
positions using a pencil.
Main Post
Mounting
Bracket
Fixing
Screws
NOTE: Consider a location within a distance of 0.8m radius from a wall power outlet to
make sure you can plug the unit into the power point easily.
For concrete or solid brick walls drill holes at the marked position, and then wedge the wall
plugs (not provided) into the pilot holes. Hold the mounting plate to the wall, screw the
mounting plate onto the wall with four screws (not provided). It is recommended to use a
torque wrench to ensure that the screws are tight. If mounting on plaster board locate the
studs behind the plasterboard and secure the bracket. The bracket must always be screwed to
a stud when mounting on a wooden/plaster wall.
2.
FAN POSITION
UP
SIDE FAN POSITION:
Slide the main post over the wall bracket from the top and secure it with 2
fixing screws (not provided).
DOWN
SIDE FAN POSITION:
Slide the main post over the wall bracket from the bottom and secure it with
2 fixing screws (not provided).
Use the holes at the top of the main post. Also refer to the sticker attached on the post.
